Dnr; Sound Control Adjustment; Selecting Stereo/Second Audio Program (Sap); Selecting The Audio Language - Sansui HDLCD3700C Owner's Manual

6
After adjusting, press ENTER to return to the PC
Setting menu. Then continue to adjust the other
items.
7
Press EXIT to return to the normal screen.
NOTE:
• If no buttons are pressed for more than approx. 60
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
• The PC settings are not effective for other input
modes.

DNR

DNR (Digital Noise Reduction) can reduce
the roughness of the picture. (This function is
available only for analog broadcast.)
1
Press MENU. Then press ▲ or ▼ to select
"Picture", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "DNR". Press ◀ or ▶ to
select "On" or "Off".
Picture
Picture Setting >>
Picture Preference Sports
Picture Size >>
Film Mode On
PC Setting >>
DNR On
3
: Select : Adjust
Press EXIT to return to the normal screen.
Sound control
adjustment
1
Press MENU. Then press ▲ or ▼ to select "Audio" ,
then press ▶ or ENTER.
2
Press ▲ or ▼ to select the item you want to
adjust.
Audio
15
Bass
Treble 15
Balance 0
MTS Stereo
Audio Language No.Info
HDMI1 Audio HDMI
Speakers On
: Select : Adjust
Bass: Press ◀ or ▶ to adjust the bass sound.
Treble: Press ◀ or ▶ to adjust the treble sound.
Balance: Press ◀ or ▶ to obtain an equal sound
level from both speakers.
• Press ▲ or ▼ to change the adjusting item.
3
After you desired setting, press EXIT to return to
the normal screen.
Selecting Stereo/Second
Audio Program (SAP)
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
When the TV receives a stereo or SAP broadcast,
the word "Stereo" or "SAP" displays on-screen
every time you press DISPLAY.
1
Press MENU. Then press ▲ or ▼ to select "Audio",
then press ▶ or ENTER.
2
Press ▲ or ▼ to select "MTS", then press ◀ or ▶
to select "Stereo".
Audio
15
Bass
Treble 15
Balance 0
MTS Stereo
Audio Language No.Info
HDMI1 Audio HDMI
Speakers On
: Select : Adjust
3
Press EXIT to return to the normal screen.
NOTE:
• Generally you can leave your TV in stereo
mode because the TV automatically outputs
the type of sound being broadcast (stereo or
mono).
• If the stereo sound is noisy, select "Mono" to
reduce the noise.
To listen to a second audio program (SAP)
Press ◀ or ▶ to select "SAP" in step 2 above. The
TV speakers will output the second audio program
instead of normal audio.
Selecting the audio
language
When two or more audio languages are included
in a digital signal, you can select one of the audio
language.
1
Press MENU. Then press ▲ or ▼ to select "Audio" ,
then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Audio Language", then
press ▶ or ENTER to display the Audio Language
menu.
3
Press ▲/▼ or Number buttons (0-6) to select
your desired language.
Audio Language
0. English
1. Language 1
2. Language 2
3. French
4. Language 3
5. Spanish
6. No Info
4 [0-6]: Select
Press EXIT to return to the normal screen.
25