Advertisement
• Please check the following if the USB connection malfunctions.
Oa_
USB cable is not connected or it is net the supplied USB cable.
....
_ Connect the supplied USB cable.
Oase_
The camera is not resegnised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
tnstallthe camera driver correctly.
Turn off the camera, remove the USB cable, plug inthe USB cable
again, and then turn on the camera.
083
Tbere is an unexpected error duringfile transfer.
i:
_ Turn the camera power off and on again. Transfer the file again.
_
When using the USB hub.
i
_ There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
When I open the Device Manager (by clicking Start _ (Settings)
Control Panel _ (Performance and Maintenance) _ System
(Hardware) _ Device Manager), there are Unknown Devises or Other
Devices entries with a yellow question mark(?) beside them or devises
with an exclamation mark(0 beside them.
Right-clickon the entl7 with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC,
and then reinstall the camera driver.
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
The camera is connected to the USB port located on the front of the
computer.
When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera. Connect
the camera to the USB port located on the back of the computer.
_;5
Are other USB cables connected to the PC?
....
_ The camera may malfunctionwhen it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
• When the movie clip doesn't play back on the PC
÷ When the movie clip recorded by the camera doesn't play back on the PC,
the causes are mostly due to the codec installedon the PC.
{76}
Advertisement
