Advertisement
÷Ifyou selected
[Computer]
in Step 4, w hen
you connected
the c amera
to your
printer,
the [ Connecting
Computer]
message
will display
and the c onnection
wilt
not be established.
In this case,
disconnect
the U SB cable,
and then follow
the
procedure
from S tep 2and onward.
Or, press
the P rinter
button
and the c amera
is connected
to the p rinter
displaying
the [ Connecting
Printer]
message.
But, the
camera
may not connect
to the p rinter,
depending
on the m anufacturer
and
mode]
of t he p dnter.
• Easy printing
When
you connect
the c amera
to printer
in the P lay
back mode,
you can print apicture
easily.
-Pressing
the p rinter(
_ )button
:
Current{y
displayed
image
will be printed
with the
printer's
default
setting.
-Pressing
the L eft
/ Right button :
Selectsa previous/ next image.
• Select pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the
desired sub menu value, and then pressthe OK
button.
When [One Pic] is selected
: The PictBfidge
function will be
applied only to the picture currently displayed.
When [AHPics] is selected
: The PictBfidge function will be applied to all
pictures,excluding movie clips and voice files.
(52_
• Setting the Number of Copies to Print
- Select [One Pic] or jAil Pics]. A screen where you can set the number of copies
to print will appear as shown below.
[When [One Pic] is selected]
[When [All Pics] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Pic] is selected : Use the Left / Right button to select another
picture. After selectinganother picture, select the number of prints for another
picture.
- After setting the number of prints, pressthe OK button to save.
- Press the Shutter button to returnto the menu without setting the number of
prints.
• AUTO SET
1. Use the LEFT and RIGHT buttons to select the
[AUTO SET} menu tab.
2. Use the UP and DOWN buttons to selectthe
desired sub menu value, and then press the OK
button.
[No]
: [CUSTOM SET] values are kept.
[Yes]
: All values inthe [CUSTOM SET] are
automaticallychanged.
Advertisement
