Download Print this page

Samsung DIGIMAX S800 User Manual page 11

Hide thumbs Also See for DIGIMAX S800:

Advertisement

• Be sure to format the memory card (see p.57) ff you are using a newly
purchased memoryfor the first time, if it contains data that the camera cannot
recognise, or if it contains images captured with a different camera.
• Turn off the camera power whenever the memory card is being inserted or
removed.
• Repeated useof the memory card will eventually reduce the memory cards
performance. Shouldthis be the case you will need to purchase a new memory
card. Wear and tear on the memory card is not covered by the Samsung
warranty.
• The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
• Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
• Please do not use or store in an environment where there are extremes in
temperature.
• Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen,clean the memory card with a soft cloth.
• Please keep the memory card in its case when not in use.
• During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
• Do not use a memory card that is used in another digital camera.
To usethe memory card in this camera, format the memory card using this
camera.
• Do not use a memory card formatted by another digital camera or memory card
reader.
• tf the memory card is subjectedto any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switcbed off or the memory card is removed while recording,
deleting (formatting) or reading.
• Samsung cannot be held responsible for lost data.
• It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks CD etc.
• tf tbere is insufficient memory available
:A [Memory Full!] message will appear and the camera will not operate. To
optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
_10}

Advertisement

loading