Camera does not take images when pressing the Shutter button
• There is insufficient memory capacity
Delete unnecessary image flies
• The memory card has not been formatted
Formatthe memory card (p.57)
• The memory card is exhausted
Inserta new memory card
• The memory card is locked
Referto [Card Locked!] error message
• The camera's power is off
Turn the camera power on
• The battery is exhausted
Insertfresh batteries.
• Battery is inserted incorrectly with the polarities reversed
Insertthe battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
• The camera stopped due to a malfunction
Remove/re-insert battery and switch the camera on
The images are unclear
•A picture was taken without setting an appropriate macro mode
Select an appropriate macro mode to take a clear image.
• The picture was taken with the subject beyond the flash range
Take a picture within the flash range
• The lens is smudged or dirty
Clean the lens
_64_
The flash does not fire
• Flash off mode has been selected
Dis-engage flash off mode
• The camera mode can't usethe flash
Refer to the FLASH instruction (p.22)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted the
default settings
Reset the date and time correctly
The camera buttons do not operate
• Camera malfunction
Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
• Incorrect memory card format
Re-format the memory card
The images don't play back
• Incorrect file name (Violation of DCF format)
Do not change the image file name
Colour of image is differentto the original scene
• White balance or effect setting is incorrect
Select appropriate White balance and effect
Images are too bright
•Exposure is excessive
Reset exposure compensation