Advertisement
• This deletes images stored on the memory.
• Deleting images in Play Mode
1. Select an image that you want to delete by
pressingthe LEFT / RIGHT button and pressthe
DELETE[ t_, )button.
2. A message will display as shown alongside on
the LCD monitor.
3. Select the sub menu va}ues by pressing
the LEFT / RIGHT button and then press
the OK button.
If [Yes] is selected : deletes the selected images.
tf [No] is selected : cancels "Delete image".
• Deleting images in Thumbnail Display Mode
1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want
to delete, and then press the DELETE ( f_ ) button.
2. A message will display on the LCD monitor as shown below.
3. Selectthe sub menu values by pressingthe LEFT / RIGHT button and then
press the OK button.
If [Yes] is selected
:deletes the selected images.
If [No] is selected
:cancels "Delete Image".
Press the
deJetebutton
• tf you select [Computer] sub menu in the [USB]
setup menu, [Connecting Computer] message will
display when you connect the camera to your
printer and the connection will not be established.
in this case, press the Printer button. [Connecting
Printer] message will display and the Easy printing
mode will be selected.
* In some instances the camera may not connect to the printer, this will depend on
the manufacturer of the printer.
- After the connection,the Easy printing menu
will display on the LCD monitor.
To display the PictBridge menu, press the
Menu button. For more information about the
PictBridge menu, refer to page 51.
{42_
Advertisement
