Advertisement
• This function helps stabilise images captured during movie recording.
1. Press the E button inthe Movie c_ipmode.
2. Press the Left / Right buttonsto select the
stabilizer menu tab.
3. Selecta desired sub menu by pressing the UP/
DOWN button and pressthe OK button.
- _
: Movie clip frame stabiliserfunction
becomes disabled.
- I_
: Preventscamera shake during movie recording.
The recording frame range wilt become narrowerthan when you
selectthe _
menu. Re-view frames may not display smoothly
on the LCD monitor.
• RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
the images to be captured.
• Setting RGB Values
1. Press the +/- button, and then use the UP and
DOWN buttons to selectthe RGB icon (
RGB ) .
The RGB menu bar wiltappear as shown.
2. Usethe UP / DOWN / LEFT and RIGHT
buttons to select the desired RGB value.
- Up / Down Button : Navigatesbetween R, G,
and B icons.
- Left / Right Button : Changes value of each icon.
3. When you press the +/- buttonagain, the value you set wilt be saved and
RGB setup mode will end.
÷ When special effect (colour) from the icon other than _
is selected, it will not
be able to select the RGB.
• You can use the + / - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
Main menu
Sub menu
RGB
R (Red), G (Green), B (Blue)
ISO
AUTO, 50, 100, 200, 400
AUTO, DAYLIGHT, CLOUDY,
WHITE BALANCE
FLUORESCENT H
FLUORESCENT L, TUNGSTEN,
CUSTOM.
Exposure c ompensation
-2.0~0.0,,-+2.0(0.5EV steps)
Available cameramode
Drem
Drel_
(29/
Advertisement
