Samsung series 7 7000 User Manual page 72

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna,
' ii
VHF/UHF Antenna
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER (b button. Plug & Play is available only when the input source is set to T_.
To return to the previous step, press the Red button.
Selecting a tanguage
Selecting Store Demo
or Home Use
Selecting an amenna
Press the A or 1!' button, then press the ENTERE_ button. POWER
Select the desired OSD (On Screen Display) language.
Press the _1or I_ button, then press the ENTERE*3 J button,
,_ Select the Home Use mode. Store Demo Mode is for retail
environments,
• To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
Press the A or T button, then press the ENTERI_%_button. Select Air, Cable or Auto.
Selecting a channel Press the A or T button, then press the ENTERIZ_ button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel --_Auto Program (p. 14),
Press the ENTER[_%_ button at any time to interrupt the memorization process.
Setting the Clock Set the Clock Mode automatically or manually.
Mode • Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
• Manual: Allows you to manually set the current date and time (p. 23),
View the HDTV The connection method for the best HD screen quality is displayed.
Connection Guide
Enjoy the TV. Press the ENTER I_ button.
if You Want to Reset This Feature...
(_ MENUiTrl --_ Setup _ Plug & Play _ ENTERI__
English