Setting The Time; Using The Sleep Timer; Setting The On/ Off Timer - Samsung series 7 7000 User Manual

SPDIF OutPut ......................................................................................................................................................................
SPDIF (Sony Philips Digital Interface)is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Ill Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
Ill Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms - 250ms).
Sound Reset (OK/Cance0
Reset all sound settings to the factory defaults.
Setting the Time
(_ MENU FITI - _ Setup -_ Time -_ ENTER E_
Time
Ill Clock: Setting the clock is for using various timer
features of the TV.
(_ The current time will appear every time you press
the _NFO button.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
- Auto: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
the time automatically.
- Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off/On): Switches the
Daylight Saving Time function on or off.
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer
(_ MENU iTrl _ Setup --_ Time --_ Sleep Timer
ENTER E_
m Sleep Timer _ : Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel the Sleep Timer, select Off.
Setting the On / Off Timer
(_ MENU llTI _ Setup --_ Time --_ Timer 1
ENTER I_
Ill Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you've
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to rv): Select Air or
Cable.
Channel (when the Source is set to rv): Select the
desired channel.
English 23