Hunter Ellipse 90064 Owner's Manual page 12

Cut out an opening for the housing.
C13
5/8
1/2
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
C15
Drill a hole in the center of each outline.
C12
C14
5/8
1/2
Mark position of screws by using holes as a template.
C16
1/8" Bit
Insert screws, leaving space between the screw head
12
41722-01 09/09/2011
E
Slide the mounting rails into brackets.
and the joist. Screws are not provided.
D