Table of Contents
Advertisement
•
Stereo
Splits the incoming stere() audio signal into left and right front channels.
Most TV
programs
and recorded
materials have stereo audio. The channel banner displays the word
Stere() when you tune to a program that is broadcast
in stere().
•
_
Adds greater depth and stere() separation
to stere() audio signals. Delivers a panoramic
3D sound stage from stere() material.
•
_
Redirects/he
treble portion of the audio in the speaker system to make dialog more
understandable.
Repositions
and elevates/he
audio to the center of the TV.
mc_
Creates a virtual 5.1 surround
sound from multichannel
source material/hrough
any
two-speaker
playback
system.
Sound Logic
Monitors a program's
audio track and limits volume excursions
to a minimum
and maximmn
volume range fi'om current volume setting. Acting like a
dynamic range limiter; it compresses
the dynamic range to limit suggested
volume increases (lkJr example,
the sudden
increase in volume you sometimes
hear when a commercial
starts). Choose &)und L_gic On or Sound Logic OJ]_
depending
on your prefi_rence.
Audio
Language
The Audio Language menu lets you choose the default audio language
you
want to hear fbr ATSC (digital TV) programs.
If the Audio Language
icon ( _
)
in the banner lights, it means there is more/han
one audio language
or audio
tkmnat (Dolby Digital, DTS, etc.) available. The system automatically
sets/he
audio program to the default audio language
when the channel you are
viewing is a digital terrestrial channel and the specified
language
is available for
/hat program.
In the Audio Language menu, highlight the default audio language
you want by
pressing the up and down arrow buttons
on your remote control. Press OK to
select whenever
available on a channel to hear that Audio Language.
Some programs
may have audio languages
available that you can hear but can't
be set as the default. To select and hear those audio languages,
navigate to the
"Change Audio" action button and select OK, or use SOUND button on remote.
Note: You can change the Audio Language temporarily by pressing
SOUNDbutton on the remote control. Changing channels reverts the
channel back to the default Audio Language original selected in the menu.
SAP (Second Audio Program)
When turned on, Second Audio Program plays the program's
audio in a second
language,
if one is available. SAP is also used to broadcast
a program's audio
3
with descriptions
of lhe vide() for the visually impaired.
Or, SA1 might contain
audio which is totally unrelated
to lhe vide().
Notes: SAP is broadcast in mono and is only available
for analog
programs,
not digital programs.
You can activate
SAP (if available)
temporarily
with the SOUND button.
Changing channels reverts SAP back to original
SAP menu setting.
TruSurround, SRSand (o) symbol is a trademark of SRSLabs, Inc.
TruSurround technology is incorporated under license from SRSLabs, Inc.
68
Advertisement
Table of Contents
