Table of Contents
Advertisement
Using
TV s
Sys' ÷
Channel Search
Engaging in a channel search tells the "IV to search tBr all/he terrestrial "IV
channels
available/hrough
the antenna inputs. When tile "IV finds an active
channel,
it places it in/he
channel list. Inactive channels
(weak stations or
channels
wi/h no signal at all) aren't placed in/he
channel list.
The Channel Search screen lets you choose a F*dl Search or a Quick Search.
Full Search
Searches bo/h Antenna A and B, and automatically
detects
whether/hey
are cable or oflLair.
Note: A Full Searchcan take several minutes.
Quick Search
Searches only t_r channels
on tile antenna you're currently
using and uses/he
current Air or Cable setting. For optimum
reception,
you
need to conduct
a Quick Search atier you've adjusted a terrestrial antenna
because
the "IV might pick up new channels.
Notes: Channel Search takes a long time to complete
because all possible
analog and digital
channels are being searched.
If a cable box is connected
to Antenna
A and GUIDE Plus+ Setup was
performed,
a channel search will not be permitted.
Software
Upgrade
The Software Upgrade screen contains current sot_ware intk/rmation
and
indicates if a new upgrade
is available. The soliware
information
and upgrades
can be accomplished
only if you have/he
TV connected
via the E/hernet cable
to the Internet with ISP subscription.
Note: If using a dialup service via a router connected
at a dialup speed of
56K, the Software
Upgrade could take several hours or more. If TV is
unplugged
while doing a Software
Upgrade during
this time, it could
render the TV inoperable.
You may want to decline a software
upgrade
if
you have this setup.
Signal
Source
The _nal
Source menu allows you to choose _e souree _oln which you
would like the signal to come: Antenna
A, Antenna B, or Video Inputs. The
same can be accomplished
using the component
but/ons
if you've set up Auto
Tuning on the remote or the INPUT button. But, if you misplace the remote,
this ti:ature gives you another way to tune to a signal source.
Signal Type
The _nal
Type screen le_ you choose whether you are receiving a signal from
cable l_V or an ofl_-air antenna
tkJrAnt A or Ant B. When you run a Full Search
in Channel Search, the TV automatically
detects your signal and you don't have
to specit) it here. However,
if you decide to change the source, you can use tile
Signal 7),pe screen. Changing the source on Antenna A may mean that you will
have to make changes to your GUIDE Plus+ Setup settings.
71
Advertisement
Table of Contents
