RCA hd52w59 Quick Start Manual

Rca lcd hdtv quick start guide

Hide thumbs Also See for hd52w59:

Download this manual See also: User Manual

Quick Start

Connecting Your HDTV

Find the back panel of your HDTV, and connect your antennas or

regular analog cable wall outlet.

Regular cable outlet

Off-air antenna for

regular (ANALOG) broadcasts

CABLE

Note: This back panel illustration is for representation

only. Your back panel might be different.

Off-air antenna for DIGITAL broadcasts

FOR FACTORY

USE ONLY

continues inside...

Guide

Important:

Do not connect the ANTENNA

DIGITAL INPUT jack to a digital

cable signal.

Tip:

If you need help deciding what

type of antenna to use, go to

antennaweb.org. By entering

where you live, this mapping

program tells you what local

analog and digital stations are

available to you.

TOCOM 16556340

Table of Contents

Page 1: Connecting Your Hdtv
Quick Start Connecting Your HDTV Find the back panel of your HDTV, and connect your antennas or regular analog cable wall outlet. Regular cable outlet Off-air antenna for regular (ANALOG) broadcasts CABLE Note: This back panel illustration is for representation only.
Page 2 Connecting Your HDTV Use the other input and output jacks to connect the rest of your home entertainment devices to the HDTV. Use the jacks that offer the best connection for each device. COMPONENT INPUT (Excellent connections) CONNECTS TO DEVICES WITH Y•Pr•Pb OUTPUT JACKS DVD Players DVD-PVRs...
Page 3: Important Information
Turning On Your TV Turning On Your TV Turning On Your TV A. Plug in the TV. Locate power cord for TV. Plug ﬂat end into power jack on TV. Plug other end into wall outlet. B. Put Batteries in the Remote. Insert 2 batteries by matching the polarities to the inside of the remote.
Page 4: Setting Up Your Tv
Setting Up Your TV The ﬁrst time you turn on your TV, the Initial Setup screens appear automatically. This setup routine guides you through the following steps to set up your HDTV: • Set the Menu Language • Complete Channel Search. Note: Make sure you have signals connected to both the ANTENNA DIGITAL INPUT and the ANTENNA/CABLE ANALOG INPUT jacks on your HDTV before you perform the channel search on both sources.