Table of Contents
Advertisement
USING
POINT
AND
SELECT
You only need to know one rule when using the remote to accesson-
screen menus and control panels: point and select. The point and select
method has two steps.
1.
Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left or
right, press the left or right arrows.
2.
Select a menu item by pressing MENUoSELECT.
Selecting an item tells the TV's menu system to go ahead and make
the change or go to a place you have indicated.
ENTERING
SETUP
The first screen of the Interactive Setup appears automatically
when
you turn on your TV for the first time or after a power outage.
1.
Press MENUoSELECT to begin setup or CLEAR to exit.
Point and SeleG
buttons
n_ms(
_y
_A_
RNORD
STOP
pAUS.E
mmc_
10 20 30
'O sO 60
70 80 'O
'%-_o0
%-
o
You can also accessthe Interactive
Setup through the Main menu:
1.
Press MENUoSELECT to bring up the Main menu.
2.
Point to Setup and press MENUeSELECT. The first Setup screen
comes up, asking you to confirm that you want to begin.
You can also select a menu item by
entering the item number.with
the
number buttons on the remote.
Press CLEAR at any time to remove all
displays from the screen and return to TV
viewing.
Many VCR user manuals refer to a
PROGRAM button. The MENUoSELECT
button on this remote works as a
PROGRAM button in VCR mode.
12
Advertisement
Table of Contents
