Set The Time; Set The Vcr1 Channel (Auto Tuning) - RCA P56925 User Manual

SET TH E TIME
The next step in the Interactive Setup lets you set the time of day.
1. Press MENUoSELECT to bring up the Set Time control panel.
,
Use the left and right arrows to point to the hour and minutes
spaces. Use the up and down arrows to scroll through the numbers
and change from AM to PM.
3. Press MENU.SELECT to continue.
SET TH E VCR1 CHANNEL (AUTO TUNING)
The next step lets you set the VCR1 channel. When you set the VCR1
channel, you're telling the TV what channel to tune to when you press
the VCR1 button on the remote. This is Auto Tuning.
Indicate which input you used to connect the VCR. If you don't have a
VCR1 component connected to the TV, skip this step or select Not
Connected from the VCR1 Channel choice list. (For more, see Auto
Tuning in the Features and Menus section.)
1. PressMENUeSELECT to bring up the VCR1 choice list.
14