Table of Contents
Advertisement
STEP 3: PLUG IN THE TV
Plug the end into the wall outlet,
matching
the wide blade of the plug
with the wide slot in the outlet.
Be sure to insert the plug completely.
STEP 4: PLACE BATTERIES
IN REMOTE
•
Remove the battery compartment
cover from the back of the
remote.
•
Insert fresh batteries.
Make sure that the polarities
(+ and -) are
aligned correctly.
•
Replace the cover.
STEP 5: TURN
ON THE TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
STE P 6: P ROG RAM TH E TV
Proceed to the next section, Interactive Setup. The interactive
setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferred
language for the menu
system and to begin the auto channel search, which puts available cable
TV or antenna signals into the TV's memory.
I_
PLAY
_AIID
<;1
C>
'0 20 30
40 sO 60
'0 80 '0
FAV,_
o 00%"
Q
i
Projection TV Convergence.
If the picture appears to have a double or
triple image or if you notice rings or halos
around objects, you may have to adjust the
color convergence.
Details can be found
under the Screen menu heading in the
Features and Menus section of this manual.
•
w
9
Advertisement
Table of Contents
