Table of Contents
Advertisement
Can't select certain channel
•
Channel may be blocked or not approved in the Parental Controls menu.
•
If using a VCR, check to make sure the TV/VCR switch on the VCR is in the correct position.
Noisy stereo reception
•
May be a weak station.
Use SOUND button to change to mono mode instead of stereo.
No picture, no sound but TV is on
•
Maybe the cable/air function is set to the wrong position.
•
Maybe a vacant channel is tuned.
•
If watching VCR (connected only through antenna input), make sure TV is tuned to channel 3 or 4 - same as CH3/4
switch on VCR. Also check to make sure TV/VCR switch on VCR is in correct position.
Sound okay, picture poor
•
Check antenna connections.
•
Try adjusting sharpness function to improve weak signals.
Black Box appears on the screen
•
Captioning may be turned on. Check the Closed-Caption Display control panel in the Channel menu.
CARE AND
CLEANING
CAUTION: Turn OFF your TV before
cleaning.
You can clean the TV as required,
using a soft lint-free
cloth. Be sure to occasionally
dust the ventilation
slots
in the cabinet
to help assure adequate
ventilation.
The TV's screen may be cleaned
with
a soft, lint-free
cloth as well.
Take care not to scratch or mar the screen, ff
necessary,
you may use a cloth dampened
with
warm
water.
Never use strong cleaning
agents,
such as ammonia-based
cleaners,
or abrasive
powder.
These types of
cleaners
will damage
the TV.
While
cleaning
do not spray liquid
directly
on the screen, or allow
liquid to run down the screen and inside the
TV. Also, avoid placing
drinks or vases with water
on top of the TV. This could increase the risk of fire or shock
hazard or damage
to the TV.
Caution:
If fixed (non-moving)
images are left on the screen for long periods, they may be permanently-imprinted
on the
screen. Such images include network Iogos, phone numbers, and video games. This damage is not covered by your
warranty. Extended viewing of channels displaying these images should be avoided.
4O
Advertisement
Table of Contents
