Table of Contents
Advertisement
STEP 1
Unpack the TV. Make sure to locate the remote control and
Connections
Foldout.
STEP 2: CONNECTING
YOUR TV
If you're only going to connect the TV to your home antenna or
cable system, use the "TV Only" connection
shown below. If
you're going to connect the TV to a VCR, satellite receiver, DVD
player or other component,
look at the Connections
Foldout. The
Connections
Foldout details ten diagrams that are recommended
for hooking up the TV to a cable box or antenna, one or two
VCRs, a DVD player, and a satellite receiver.
TV ONLY
This is a basic connection from an antenna or cable system to
your TV. Connect the cable as shown. If you have a VCR or other
components to connect to the TV, skip to the top of the next
page.
CABLE, CABI.E BOX, OR ANTENNA
TV WITH
OTH ER COMPONENTS
Use the Connections
Foldout to connect your TV to a VCR, DVD
player, and/or satellite receiver. After connecting
your TV and
other components,
proceed to the next step. See Appendix
A for
detailed
information
about using each of these connections.
If your components
don't match those shown on the foldout,
or
if you prefer a different
connection,
see your dealer or specific
component
user manuals.
I
4
Advertisement
Table of Contents
