Step 3: Place Batteries In The Remote Control; Step 4: Plug In And Turn On The System; Step 5: Complete The Interactive Setup; Step 6: Order Programming - RCA DTV306 User Manual

Table of Contents

Advertisement

STEP 3: PLACE BATTERIES
IN THE
REMOTE
CONTROL
Follow these steps whenever
you need to install or change the batteries
in your TV's remote control.
1.
Remove the cover from the battery compartment.
2.
Insert batteries
into the battery
compartment,
matching
the + and - end of each battery.
3.
Replace the cover.
STEP 4: PLUG IN AND
TURN
ON THE
SYSTEM
Plug one end of the power cord into the back of the television
as shown
on right. Plug the other end into a wall outlet.
Be sure to insert the
plugs completely.
To turn on the TV, press the TV or ON*OFF button
on the remote control
or the POWER button
on the front
panel. It may take several seconds for
the TV to turn on.
STEP 5: COMPLETE
THE INTERACTIVE
SETUP
Interactive
setup appears when you turn on your TV for the first time.
Follow the steps to configure
the basics of your system, such as setting
up the time and day, searching for available
channels, and setting
up
speakers. To run it again, select Assistance from the main menu, then
select Interactive
Setup. For more details, see the section "Getting
Assistance"
in this book.
STEP 6: ORDER
PROGRAMMING
You should decide if you would
like to receive DIRECTV® programming*.
To receive DIRECTV programming,
your satellite dish antenna must be
installed and pointed
correctly. You must also contact your service
provider, DIRECTV.
Programming
with DIRECTV:
Call 1-800-347-3288
* Receipt of DIRECTV programming
is subject to the terms of the DIRECTV
Customer
Agreement,
a copy is provided
with your first billing
statement.
DIRECTV and DIRECTV PLUS are trademarks
of DIRECTV, Inc., a unit of Hughes
Electronics Corp., and are used with
permission.
When you order programming, you need
to know your access card number. To get
the number, select Assistance from the
main menu and then select System Test.
Wait for the system to run all of its tests.
The access card number is displayed at the
end of the system test.
Write the access card number in the space
below for easy reference:
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

P61310F38310

Table of Contents