Table of Contents
Advertisement
CHANGI
NG CHANNELS
To change channels by entering
numbers with the remote control,
the
remote needs to be in the correct "mode":
either DIRECTV mode (if you
subscribe to DIRECTV) or TV mode.
When you want to watch
DIRECTV ® programming,
put the remote
in DIRECTV mode
1.
Make sure the TV is in DIRECTV mode by pressing DIRECTV on
the remote control.
2.
Enter the channel number and press OK. If you do not enter at
least three digits, "???" will appear in the channel entry box,
and the system will wait for a valid entry.
DIRECTV
button
When you want to watch a digital
or analog TV
channel, put the remote
in TV mode
If you want to watch a digital channel:
1.
Make sure the TV is in TV mode by pressing TV on the remote
control,
2,
3,
4,
Enter the primary channel number. This number will appear in
the primary channel entry box. If there is no subchannel,
press OK.
If the primary channel number has fewer than three digits and
you want to enter subchannel
numbers,
press the right arrow to
advance to the subchannel
entry box.
Enter the number of the subchannel.
This number will appear in
the subchannel
entry box.
5.
Press OK on the remote control to tune to the channel.
If you want to watch an analog channel:
1.
Make sure the TV is in TV mode by pressing TV on the remote
control.
2.
Enter the channel number. This number will appear in the
primary channel entry box. (Analog
channels don't
have
subchannels.)
3.
Press OK on the remote control to tune to the channel.
Channel
entry box
Primary
channel
entry box
Highlighted
to
indicate
DIRECTV
mode
f
G
TV
button
Subchannel
Highlighted
to
entry box
indicate
TV
mode
Note that you can always use the channel
up and down buttons on the remote
control to change channels within the
DIRECTV and TV modes.
27
Advertisement
Table of Contents
