Table of Contents
Advertisement
Setup and Connections
Step 4: Plug in the TV
Plug the end into the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.
Step 5: Place Batteries in Remote
•
Remove the battery compartment cover from the back of the
remote.
•
Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
•
Replace the cover.
Step 6: Turn On the TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
On-Screen Program Guide
The TV is designed to bring up the GUIDE Plus+ on-screen program
guide when you use the TV button on the remote to turn on the TV
(after you have set up the GUIDE Plus+ system). For more information on
setting up the GUIDE Plus+ system, see the next section, Interactive
Setup.
To get out of the GUIDE Plus+ System:
•
Press OK to exit the GUIDE Plus+ system and tune to the highlighted
channel.
•
Press GUIDE to exit the GUIDE Plus+ system and tune to the channel
displayed in the View window.
•
Press CLEAR to exit the GUIDE Plus+ system and go to the last
channel you were watching.
Step 7: Program the TV
Proceed to the next section, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferred language for the menu
system and to begin the auto channel search, which puts available cable
TV or antenna signals into the TV's memory.
10
ON OFF
VCR1
TV
TV
SAT CABLE
DVD
VCR2
AUX
MUTE
SKIP
SOUND
GO BACK
GUIDE
INFO
Advertisement
Table of Contents
