Using The Remote To Select An Audio Processor; Menu - ProScan PS32710YX1CJ5 User Manual

FEATURES AND MENUS
Sound Logic' Stereo Sound Logic monitors a program's
audio track and limits volume excursions to a minimum and
maximum volume range from the current volume setting.
Acting like a dynamic range, it compresses to limit sudden
volume increases, like when a commercial comes on.
SecondAudio Program (SAP) Plays the program's audio in a
second language, if one is available. The TV displays the word
SAP when you tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also
used to broadcast a program's audio with descriptions of the
video for the visually impaired.
Audio Output & Speakers Displays a choice list that lets you turn
the TV's internal speakers on or off and set the audio outputs to
fixed-level or variable control level.
Variable Output, Speakers On This setting turns the TV's
speakers on and allows variable output from the TV's audio
output jacks.
Variable Output, Speakers Off This setting turns the TV's
speakers off and allows variable output from the TV's audio
output jacks.
Fixed Output, Speakers Off This setting turns the TV's
speakers off and allows fixed output from theTV's audio
output jacks to an external device such as a surround sound
amplifier. With Fixed Output On, the TV's volume control,
tone controls and mute are disabled.
USING THE REMOTE TO SELECTAN AUDIO
PROCESSOR
You can change the audio processor from the Audio menu, as
illustrated above, or by pressing the SOUND button on the
remote. To make a selection using the remote:
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR
to exit.
f
_/D VCR_ AUX SAT.CABLE
&&°&&
Sound button __
MENU CLEI, R
,O _O :,O
0© 0© o©
© 0© ,,©
nEVEnSE PLAY FOR_ARD
31