Setting The Sat/Cable Channel (Auto Tuning) - ProScan PS32710YX1CJ5 User Manual

INTERACTIVE SETUP
SETTING THE
SAT/CABLE
CHANNEL
(AUTO TUNING)
The next step lets you set the SAT/CABLE channel. When you set the
SAT/CABLE channel, you're telling the TV what channel to tune to
when you press the SAT,CABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable
box. If you don't have a satellite receiver or cable box connected to the
TV, skip this step or select Not Connectedfrom the SAT/CABLE
Channel choice list. (For more, see Auto Tuning in the Features and
Menus section.)
1. Press MENU or OK to bring up the SAT/CABLE choice list.
2.
Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV. If you used audio/video
cables, choose the video input you connected the cables to.
3. Press MENU or OK to continue.
If You Have Both a Satellite
Receiver and a Cable Box
Connected to the TV
The remote cannot control both a cable
box and the satellite receiver. If you
choose to have the remote control the
satellite receiver; you must then use your
cable box remote to control the cable
box. You may, however; prefer to use the
satellite receiver remote for satellite
programming, and set your SAT.CABLE
button to control your cable box. It's your
choice.
19