Making Connections To The Front Panel; Care And Cleaning - ProScan PS32710YX1CJ5 User Manual

REFERENCE
MAKING CONNECTIONS TO THE FRONT PANEL
Note: Model PS27610 is not equipped with front paneljacks.
You can connect one of many types of devices to theTV's front panel, such as a video game or camcorder
for playback.
To connect a device to the front panel:
1. Open the small front panel door protecting the front INPUT jacks. (For Direct view sizes 27"- 36" the
door is located on the left side of the TV.)
2. Connect the device's audioNideo outputs to the INPUT jacks on the TV.
3. Press the INPUT button on the remote control until FRNT appears in the channel banner.
CARE AND CLEANING
CAUTION: Turn OFF your TV before cleaning.
You can clean theTV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation
slots in the cabinet to help assure adequate ventilation.
The TV's screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the
screen. If necessary, you may use a cloth dampened with warm water.
Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of
cleaners will damage the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and
inside the TV. Also, avoid placing drinks or vases with water on top of the TV. This could increase the risk
of fire or shock hazard or damage to the TV.
Caution: If fixed (non-moving) images
are left on the screen for long periods,
they may be permanently imprinted on
the picture tube (or ProJection TV
picture tubes). Such images include
network Iogos, phone numbers, and
video games. This damage is not covered
by your warranty. Extended viewing of
channels displaying these images should
be avoided.
56