Using The Remote To Selectan Audio Processor - ProScan PS32510YX1CM2 User Manual

FEATURES AND MENUS
Sound Logic Stereo Sound Logic monitors a program's audio
track and limits volume excursions to a minimum and
maximum volume range from the current volume setting.
Acting like a dynamic range, it compresses to limit sudden
volume increases, like when a commercial comes on.
Second Audio Program (SAP) Plays the program's audio in a
second language, if one is available. The TV displays the
word SAP when you tune to a program that is broadcast with
SAP information. SAP audio is broadcast in mono. SAP is also
used to broadcast a program's audio with descriptions of the
video for the visually impaired.
Audio Output & Speakers Displays a choice list that lets you
turn the TV's internal speakers on or off and set the audio outputs
to fixed-level or variable control level.
Variable Output, Speakers On This setting turns the TV's
speakers on and allows variable output from the TV's audio
outputjacks.
Variable Output, Speakers Off This setting turns the TV's
speakers off and allows variable output from the TV's audio
outputjacks.
Fixed Output, Speakers Off This setting turns the TV's
speakers off and allows fixed output from the TV's audio
output jacks to an external device such as a surround sound
amplifier. With Fixed Output On, the TV's volume control,
tone controls and mute are disabled.
USING THE REMOTE TO SELECTAN AUDIO
PROCESSOR
You can change the audio processor from the Audio menu, as
illustrated above, or by pressing the SOUND button on the
remote. To make a selection using the remote:
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR
to exit.
f
Sound button __
_/D vcn_ Aux S/_T,Ct,SLE
&&°&&
MENU CLEAR
_O20 :,C)
0© 0©
© o© ,,©
,G..A
_EVE_SE PLAY FOR_ARD
31