Setting The Sat/Cable Channel (Auto Tuning) - ProScan PS36605YX4CK2 User Manual

INTERACTIVE SETUP
2,
Point to the choice that matches the way you have your DVD
player connected to the TV. If you used audio/video cables,
choose the video input you connected the cables to.
3, Press MENU or OK to continue,
SETTING THE
SAT/CABLE
CHANNEL
(AUTO TUNING)
The next step lets you set the SAT/CABLE channel. When you set the
SAT/CABLE channel, you're telling the TV what channel to tune to
when you press the SAT.CABLE button on the remote,
Indicate which input you used to connect a satellite receiver or a cable
box. If you don't have a satellite receiver or cable box connected to
the TV, skip this step or select Not Connectedfrom the SAT/CABLE
Channel choice list. (For more, see Auto Tuning in the Features and
Menus section.)
1. Press MENU or OK to bring up the SAT/CABLE choice list.
2,
Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV. If you used audio/video
cables, choose the video input you connected the cables to.
3, Press MENU or OK to continue,
If You Have Both a Satellite
Receiver and a Cable Box
Connected to the TV
The remote cannot control both a cable
box and the satellite receiver. If you
choose to have the remote control the
satellite receiver, you must then use your
cable box remote to control the cable
box. You may, however, prefer to use the
satellite receiver remote for satellite
programming, and set your SAT,CABLE
button to control your cable box. It's your
choice.
19