Table of Contents
Advertisement
To Lock
While
a Timer
Recording
is in Progress:
Press and hold the VCR button
on the remote
for
approximately
six seconds.
To Unlock:
Press and hold the VCR button
on the
remote
for approximately
six seconds.
Time
Counter
The time
counter
shows
the actual time
it takes to record
a
program
or play back a segment
of a recorded
tape.
It
helps
locate
the beginning
or end of programs
you taped.
The time
counter
resets
to 0:00:00
whenever
the tape is
ejected
from
the VCR.
For example,
if you record
a 30-minute
program
at the
beginning
of the tape
and you want
to go to the end of
that program
to begin
another
recording,
you would:
1.
Press INFO twice
to display
the time
counter.
2.
Press CLEAR to reset the time counter
to 0:00:00.
3.
Press FORWARD
to forward
the tape
until the time
counter
reads
0:30:00.
4.
Press STOP. This is the approximate
end of the
program.
(You may want
to press PLAY to verify.)
Now, you can
begin
recording
at this spot.
5.
Press INFO to remove
the time counter
from
the
screen
and return
to the normal
display
mode.
On-Screen
Displays
The INFO button
shows
the status
of the VCR (STOP, PLAY,
RECORD,
etc.), channel
number,
time counter,
date, time,
and tape
speed
on the TV screen.
The date and time
must
be set before
they can be displayed.
1.
Press INFO to see the on-screen
displays.
2.
Press INFO again
to have only the time
counter
remain
on the screen.
3.
Press INFO again
to remove
the time
counter
from
the
screen
and return
to the normal
display
mode.
Turning
off the VCR also resets the displays.
1
2
3
0:30:00
HOURS---///
MrNUTES
[
SECONDS
The timer counter's
on-screen
display
lists hours,
minutes
and seconds
of a
segment
of tape.
HOURS
MINUTES
(
Stop
Ch
05
_'0:30:00
I
_SECONDS
11/18/99
Thu
01;30PR
SLP
On-Screen
Display(Times
Out)
0:30:00
Time Counter
Only (Does Not Time Oul
No Displays
Will Appear
(Useful
for Dubbing)
43
Advertisement
Table of Contents
