Table of Contents
Advertisement
Will not record
or play
Check to make sure there is a tape in the VCR.
Try ejecting
and reinserting
the cassette.
Check to make sure the tape is not broken.
Check to make sure the VCR is not in pause mode. Press PAUSE or
PLAY to return to normal
playback.
Check the ProTect Plus
TM
feature.
"SAFE"
displays
when a button
is pressed
on the remote
control
or
VCR
The "SAFE"
indicator
displays when the ProTect Plus
TM
Locking
feature is activated
or when a button
on the remote or VCR is
pressed and ProTect Plus is activated.
Rewind
does not operate
Check to make sure the tape is not already rewound.
VCR
Plus+ system
or timer recording
not made
or wrong program
recorded
Check to make sure the correct VCR Plus+ system code is entered.
Check to make sure the cable box or satellite
receiver
was turned
on when recording
was to begin.
Check to make sure the program
was entered correctly
(wrong
channel
or times),
Power interruption.
Reset the clock,
Check to see if time and date are correct - including
AM/PM.
Check to make sure the program
did not exceed the tape's length or
the tape was not rewound
beforehand.
Check to make sure the VCR was turned off at the time recording
was to start.
Check to make sure there was a tape in the VCR and the cassette's
safety tab was intact.
VCR ejects cassette when the end of the tape is reached during
a
timer recording.
Check to make sure VCR Plus+ system
setup was completed
correctly.
Will not record
Check to make sure the safety tab is intact.
Check to make sure the VCR is not in the line mode. Press INPUT
on the remote.
59
Advertisement
Table of Contents
