Table of Contents
Advertisement
Back Panel
@OOTOOOT
GATV
LrNE I AUXI_
CH3 CH4 switch
Selects the VCR signal channel. This is the
channel the TV must tune to in order to see the VCR's images.
Necessary if connecting
the VCR using one of the basic hookups.
AUDIO (L and R) and VIDEO IN Jacks
Receives signals from
another
component
(like a VCR or camcorder)
when it is
connected
to the VCR with these jacks. Use INPUT on the VCR's
remote control
to select L1 (Line input). Hi-Fi or mono signals as
well as video can be recorded when the external device is
connected
to the VCR with these jacks.
AUDIO (L and R) and VIDEO OUT Jacks
Sends signals from
VCR to another
component
(like a TV or VCR) when connected
to
a TV using these jacks.
ANT IN jack
Receives a signal through
a coaxial cable from an
antenna
or cable system when attached
with this jack
OUT TO TV jack
Passes a broadcast
signal to a TV whe,_ _uE_nected
using the coaxial cable supplied.
56
Advertisement
Table of Contents
