Display Panel - GE VG4275 User Manual

Display Panel
REG
VCR
Id '-. 3 1-I
AM TIMER
REClndicator(REC) Lights up and replaces the time display when the VCR is recording.
• me, Channel Number, Line Input Indicator (L1 or L2), Tape Speed Indicator, or Status
Indicator
Channel Number or Line Input Indicator Thechannel number appears when theVCRis
tuned to a channel. The line indicator (L1 or L2) appears when the VCR's line input is selected.
Select L1 to record from the jacks on the back of the VCR or select L2 to record from the jacks on
the front of the VCR.
Status Indicators Show what the VCR is doing.
• EJEC (Eject) Cassette ejected
• FF Fast forwarding
• HI VCR turned on and BYE VCR turned off
• PLAY In playback
• REC Recording and RECP For record-pause mode
• SEW Rewinding
• BO:OO-R4:@O Express recording in progress (zero to four hours in half-hour increments)
• SAFE ProTect Plus feature turned on
• SCH and SCH- Forward or reverse search
• SLW In slow playback
• STILL Play-pause
• STOP Tape is stopped
Tape Insetted indicator ((][)) Appears on the front panel display any time a videocassette is
inserted into the VCR. This icon will flash if a timer recording has been set, power turned off on
the VCR, but no tape inserted.
Tape Speed Indicator (SP and SLP) Press SPEED on the remote control to change.
"lime The current time appears, Only an AM indicator appears with the time. There is no
indicator for PM.
TIMER Lights during express recording and when VCR is set for a timer recording and then
powered off.
VCR Indicator (Applies only if the VCR Viewing Channel is 3 or 4). Press the TV-VCR button to turn
on or off.
VCR indicator on: TV is viewing signals from the VCR.
VCR indicator off: TV is viewing signals from an antenna, satellite or cable system.
55