Cable Box Setup - GE VG4275 User Manual

Cable Box Setup
This set up applies only when all channels are received
through a cable box. In this case, the VCR will automatically
enter the channel used to view cable box programming.
Your VCR will use this channel for all future timer
recordings.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
Lmi_.mlh
5 getup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
I Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
.
,
0 Exit
Press 5 to display CABLE BOX SETUI_ Then select
one of the three choices.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
mm ..=
2 Only SOME channels
3 Eancet setup
If you selected ALL Channels, enter the output channel
of your cable box (usually 03 or 04), or press the INPUT
button on the VCR's remote to select the VCR's video
input channel if you used the AUDIO/VIDEO jacks.
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, A, or Video)
Enter 01-13 or INPUT
Press MENU to cancel
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4, or video)
04
Press CLEAR to correct
Press MENU to continue
Continued on Next Page
Choosing the Right Setup for
Your Cable Box
If you use your cable box to receive:
ALL channels- enter two numbers
for the output channel of your cable
box or press INPUT if you connect
your cable box with AUDIO/VIDEO
jacks,
Only SOME channels- choose this
option if you only use the cable box
to unscramble
premium
channels.
Cancel setup will take you to a
screen stating your VCR will not
control the cable box channel during
timer recordings.
9