Cable Box Setup - GE VG4270 User Manual

Cable Box Setup
This set up applies only when all channels are received through
a cable box. In this case, the VCR will automatically enter the
channel used to view cable box programming. Your VCR will
use this channel for all future timer recordings.
1. Press MENU to display the VCR MAIN MENU.
VCR RAIN MENU
1 Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 3 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable Box Setup
0 Exit
3. Press 4 to display CABLE BOX SETUR Then select
one of the three choices.
.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SORE
channels?
1
ALL channels
2
Only
SOME channels
3
Cancel setup
If "ALL Channels" is selected, enter the output channel
of the cable box (usually 03 or 04), or if Audio/Video
(A/V) jacks connect the VCR to the TV, press the INPUT
button on the VCR's remote control.
(Continued on next page)
Choosing the Right Setup for a
Cable Box
If you use your cable box to receive:
ALL channels- enter two numbers for
the output channel of your cable box
or press INPUT if you connect your
cable box with AUDIO/VIDEO jacks.
Only SOME channels- choose this
option if you only use the cable box
to unscramble premium channels.
Cancel setup will take you to a screen
stating your VCR will not control the
cable box channel during timer
recordings.
4
9