Step 4: Plug In Thetv; Step 5: Place Batteries In Remote; Step6:Turn On Thetv; On-Screen Program Guide - ProScan PS36605YX4CK2 User Manual

SETUP AND CONNECTIONS
STEP 4:
PLUG IN THETV
Plug the end into the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet, Be sure to insert the plug completely,
STEP 5: PLACE BATTERIES IN REMOTE
Remove the battery compartment cover from the back of the
remote.
Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
Replace the cover.
STEP6:TURN
ON THETV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON-SCREEN PROGRAM
GUIDE
The TV is designed to bring up the GUIDE Plus+ on-screen program
guide when you use the TV button on the remote to turn on the TV
(after you have set up the GUIDE Plus+ system). For more information,
see the GUIDE Plus+ Features & Setup booklet.
To
GET OUT OF THE
GUIDE:
Press OK to exit the Guide and tune to the highlighted channel,
Press GUIDE to exit the Guide and tune to the channel displayed
in the View window,
Press CLEAR to exit the Guide and go to the last channel you were
watching,
STEP 7:
PROGRAM THE
TV
Proceed to the next section, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferred language for the menu
system and to begin the auto channel search, which puts available
cable TV or antenna signals into the TV's memory.
Projection TV Only.
If the picture appears to have a double or
triple image or if you notice rings or halos
around objects, you may have to adjust
the color convergence. Details can be
found under the Screen menu heading in
the Features and Menus section of this
manual.
10