GE 27GT630YX51AA5 User Manual page 18

ConnecHons & Setup
Step 1: Identifying Your TV's Location
1. If your country is highlighted, press OK on the remote control.
If your count W isn't highlighted, press the up or down arrow button on the
remote control to highlight your count W and press OK.
.
Use the number buttons on your remote to enter your zip code.
Press OK when you're finished.
Note: If your postal code contains letters, press the 'up and down arrow buttons on
your remote to enter letters, and press the right arrow button to go to the next
space. The left arrow button moves"you to the left.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program listings, the GUIDE Plus+ system needs to know if
your TV is connected to cable.
1. If your TV is connected to cable, highlight Yes" a nd press OK.
If your TV isn't connected to cable, highlight No and press OK (STEP 3:
Corq'ig_ring Jbr a VCR appears).
.
If you have a cable box connected to this TV, highlight Yes" a nd press OK on
your remote control.
Note: The next series of screens is very important because the GUIDE Plus+
system must find the correct cable box inJbrmation in order to receive the correct
TV program listings.
If you don't have a cable box connected to this TV, highlight No and
press OK (STEP 3: CorqiguringJbr a VCR appears).
77p
If you're not sure which channel is the
cable box's output channel, consult
the book that came with your cable
box or contact your cable company.
16 Chapter I