GE 27GT630YX51AA5 User Manual page 16

ConnecHons & Setup
Plug in the TV
Plug the end of the power cord into the wall outlet. Match the wide blade of the plug with the
wide slot in the outlet. Insert the plug completely into the outlet.
Put Batteries in the Remote
l. Remove the battery compartment cover on the remote.
2. Insert new batteries. Match the polarities (+ and -) on the batteries with the
diagram on the remote.
3. Put the battery compartment cover back on the remote.
<_<>D
Use the arrow buttons and the OK
button to move through the menu
system.
How to Use the Remote Control to
Complete the Interactive Setup
The technical term is "Navigation" - how you move through the on-screen
menus. The theory is the same throughout the menu screens: highlight your
choice and select it.
To highlight a menu item, press the arrow buttons on the remote to highlight
one of the items listed on the screen. Use the up or down arrow button to move
up or down. Use the right or left arrow button to move right or left.
To select the item that you've highlighted, press OK.
Note: Highlighted means that the menu item stands out J}'om
other menu items on the list (appears darkeg brighteg or a diJJerent color).
Turn on the TV
Press the POWER button on the remote control or the TV (the first screen of
the Interactive Setup appears). The menu screens "time out" after a period of
time if you don't make a selection. The tips in this section tell you how to access
the Setup menu screens manually.
14 Chapter I