Display Button; Time Counter - RCA VR605HF User Manual

Playing a Tape
Using the Playback Features

DISPLAY Button

The DISPLAY button shows the status of the VCR channel number, time counter,
date, time and tape speed on the TV screen. The time and date must be set before
they can be displayed.
1. Press DISPLAY.
2. Press DISPLAY again to display only the time
3. Press DISPLAY again to return to TV viewing.

Time Counter

The time counter shows the actual time it takes to record a program or play back a
segment of a prerecorded tape. It helps locate the beginning or end of programs
you taped. The time counter resets to 0:00:00 when the tape is ejected from
the VCR.
For example, if you record a 30-minute program at the beginning of the tape and
you want to go to the end of that program to begin another recording,
you would:
1. Insert the prerecorded tape.
2. Press DISPLAY twice to display only the time
3. Press FF to fast forward the tape until 0:30:00
4. Press CLEAR to reset the time counter to 0:00:00.
5. Press DISPLAY to remove the time counter from
16
If you do not press DISPLAY again, this display
times out.
counter on the TV screen.
Turning off the VCR automatically returns the
displays to normal.
counter on the TV screen.
appears in the time counter and press STOP.
The time counter is removed from the TV screen
during fast forward.
The time counter does not advance when it
detects no signal (blank tape).
the screen.
STOP CH 05
Press
Status Displays
DISPLAY
08/04/96 SUN 01:30AM SLP
Hours
Press
DISPLAY
Time Counter Only
Again
No Display
Press
DISPLAY
Again
0:30:00
0:30:00
Minutes
Seconds
0:30:00