ProScan PS20112 Owner's Manual page 13

A.dio_Menu: Basic! Functt_0:.s
I. Repeatedly
pressMENUte ;¢._: _,,." : ._. 2. Thenpress + or- to
selectAUDI0 __Vl_d_:f!'_': : display the audiomenu.
MENU._ -Ir.',t,z,n,=_,,[=,..
3. Repeatedlypress
MENU to select a
function,then press +
or - to adjust it.
f'_l_J e] [ I '
Pressing MENU moves down the screen (one item per press).
The audio menu will automatically disappear from the
screen if you do not press + or - within a few seconds.
Via remote control, your TV will "remember" which
function you displayed last, even after the menu has
disappeared from the screen. So, if you want to adjust the
same function again, simply press the + or - button on the
remote control. The last function you adjusted will
reappear on the TV screen.
TREBLE adjusts the high frequency audio. Press + to increase
treble, or press - to decrease treble.
BASS adjusts the low frequency audio. Press + to increase bass, or
press - to decrease bass.
BALANCE adjusts the left/right balance of sound from the speakers.
When adjusting the balance, sit in your normal viewing seat while
pressing the + or - button until the sound seems to originate from
a point halfway between the speakers.
STEREO/SAPlets you choose either monaural or stereo audio, or
SAP audio (when it is available) by pressing the + or - button.
Normally, you can leave this function set to STEREO,and your TV
will automatically produce either monaural or stereo audio
whichever is broadcast. Details about stereo and SAP are on
page 10.
EXPANDEDSTEREOcan be turned 3N or OFFby pressing + or -.
This feature adds greater depth and dimension to stereo
broadcasts. You will probably want to leave this function turned
ON so your TV will automatically expand the stereo signals
whenever a stereo broadcast is received (or whenever a stereo tape
is played though a stereo VCR connected to the TV's audio/video
jacks labeled INPUT). Details about expanded stereo are on
page 11.
SPEAKERS 0N/0FF lets you turn of[ the TV's speakers by pressing
+ or -. You will probably want to leave the TV's speakers turned
on unless you connect an amplifier (with its own set of speakers)
to the appropriate jacks on the ba(k of the TV as described on
page 43. Turning this function of[, turns off not only the TV's
internal speakers but also any external or surround speakers
connected to the TV's speaker temainals. Sound will then only
come through the speakers connected to the amplifier, since the
TV's speakers are turned off.
9