Table of Contents
Advertisement
Using
the
Playback
Features
Zero
Search
The zero search feature allows you to quickly return to a counter
reading
of 0:00:00 at
any spot on the tape. This is convenient
when you want to watch a segment
of the tape
several times.
1. Insert the prerecorded
tape and press STOP.
9. Press DISPLAY twice to display
only the time
counter
on the TV screen.
3. Locate the point on the tape that you want to
return to quickly.
4. Press CLEAR to reset the time counter
to 0:00:00.
5. You can continue
to play the tape or perform
other
functions.
When you are finished, press STOP.
6. Press SEARCH twice to display
the ZERO SEARCH
menu. The current tape counter is displayed.
7. Press REW to return to 0:00:00. When the VCR
reaches 0:00:00 it will begin playback.
If the time counter reading has a minus (-) in front
of it, press FWD to return to a reading of 0:00:00.
8. Press STOP to stop zero search.
ZERO
SEARCH
Current
tape
counter
is
2:17:25
Press
REW
to
go
to
0:00:00
Press
SEARCH
to
exit
-OR-
ZERO
SEARCH
Current
tape
counter
is
-2:17:25
Press
FF
to
to
0:00:88
Press
SEARCH
to
exit
19
Advertisement
Table of Contents
