Remote Buttons - ProScan PS32510YX1CM2 User Manual

USING THE REMOTE
REMOTE BUTTONS
ON.OFF When in TV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the
device on and off. When pressed twice within two seconds all devices
that are on will be turned off (this feature only works with most
ProScan, RCA and GE products).
VCR1 Puts the remote in VCR mode and if autotuning is enabled, it
will turn on the TV and tune to the correct channeh
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD Puts the remote in DVD mode and if autotuning is enabled, it
will turn on the TV and tune to the correct channeh
VCR2 Puts the remote in VCR2 mode and if autotuning is enabled, it
will turn on the TV and tune to the correct channel.
LED Red light which indicates programming mode when programming
the remote.
AUX Puts the remote in AUX mode. Also turns on the TV, if autotune
is enabled.
SAT,CABLE Puts the remote in SAT.CABLE mode and if autotuning is
enabled, it will turn on the TV and tune to the correct channel.
MUTE Reduces the TV's volume to its minimum level. Press again to
restore the volume.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
VOL - or VOL + Decreases or increases the TV's volume.
SOUND Press once to display the audio processor choice list. Point
and select to choose a different processor or press (:LEAR to exit.
GO BACK Returns you to the previous channel.
(_ Press to illuminate the remote buttons. The light automatically
shuts off within a few seconds of the last button press.
GUIDE Brings up GUIDE Plus+ Gold system and exits the Guide.
INFO Press to get more information about a program, channel, or
advertisement.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls. Also move the PIP window
when no menus are on the screen.
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
LED
VCR1 ON 3FF
TV
DVD VCR2 AUX SAT,CABLE
&&'&&
MUTE SKIP
GUIDE INFO
© ©
© ©
MENU CLEAR
,O 20 30
,O0000
7 0 8 0 9 0
WHO*INPUT ANTENNA
o00 o
REVERSE PLAY FORWARD
REC.VCR+ STOP PAUSE
PIP SWAP CH CTRL RESET
OO©©
22