Programming The Simple Remote; Simple Remote Buttons - ProScan PS80690 User Manual

PROGRAMMING THE SIMPLE REMOTE
There are two methods to program the simple remote's VCR button:
CODE SEARCH and DIRECT ENTRY. The simple remote's TV button is
already programmed for your TV.
To program the VCR button using CODE SEARCH
1. Make sure the VCR is turned off unless it is a GE, PROSCAN, or
RCA product. If the VCR is a GE, PROSCAN or RCA product, turn
iton.
2:. Pressthe VCR button and the POWER button simultaneously.
3. Release the two buttons.
4. Pressthe POWER button repeatedly until the VCR turns ON.
5. Press the CHAN v button to verify the VCR operates correctly.
Press MENU to complete the process.
To program the VCR button using DIRECT ENTRY
1. Find the keypress combination for your VCR by locating your brand
of VCR in the VCR Codes table on the next page.
2. Note the code numbers that follow your brand of VCR.
3. Locate the code number in the Key Combination chart on
the next page.
4. Press and hold the VCR button.
5. Enter the four keypresses shown in the Key Combination Chart.
Symbol
A
v
>
<
Simple Remote Button
CHAN UP
CHAN DOWN
VOL UP
VOL DOWN
28