Table of Contents
Advertisement
Tape Counter with Memory Stop
(O000M)
Press the DISPLAY button to display the
tape counter. The tape counter helps
locate segments of tape.
•
Memory stop is turned on whenever
the tape counter appears.
•
Details are on page 34.
Tape Warnings (TAPE, NO TAPE, and
TAPE END)
•
TAPE flashes when you try to record
with the safety tab removed.
•
TAPE flashes when a damaged tape is
inserted. Remove the tape and replace
it with a new one.
•
NO TAPE flashes when you try to
record with no cassette
inserted.
•
TAPE END flashes when there is
approximately five minutes of
recording time left on the tape.
•
TAPE END briefly appears when you
reach the end of the cassette when
you're recording.
Time and Date Display
Press the DATE/TIME button to display
the time and date, AUTO date, auto
TITLE, date only, or no date when the
camcorder is in record-pause.
•
These displays are recorded on the
tape when they appear in the
viewfinder.
•
Details
are on pages 22-23.
Tape-Remaining Indicator (_l)
Press the DISPLAYbutton
to display the
tape-remaining indicator. This display
shows the approximate amount of tape
left for recording or playback. Details are
on page 30.
H
Zoom ( _) and ZOOM Indicators
u
zoom indicator ( t ) appears
The
when you use the power zoom
buttons (Tand !4/).
•
ZOOM appears when you zoom with
the Tbutton more than 16 times.
Derails are on page 31.
27
Advertisement
Table of Contents
