Messages - RCA RP8085 User Manual

÷
÷
Selected Mode
I
Music Calendar
Playing Disc CD Message Display/Track Time/Track Number
Fig. 1 Vacuum Fluorescent Display
CD TITLE
For inputting CD titles.
CLEAR
To clear the stored program in memory (either
program play or ATS program), press and hold
the button until the display shows CLEAR which
indicates the memory is cleared and empty.
OK
To confirm selection during program, entering
CD titles etc.
PEAK SEARCH
To scan through the disc and search the peak
tone (with peak tone time flashes on display)
for your corresponding sound adjustment when
you want better recording effects.
(Note: the unit may detect more than one peak
tone points in different searches as the peak
tone difference may fall within the minimum
detectable range.)
Phones Jack
Insert the plug of a headphone set (not
included) into this jack for private listening.
Phones Level (for headphones)
When listening to music with headphones (not
included), adjust this knob to your desired
volume level.
Vacuum Fluorescent
Display (VFD) messages
As you select various modes, the VFD shows the
settings and current status of the unit. Fig.1
shows the majority of messages that may appear
on display. Also refer to page 11 for more
display messages.
Have a Blast - Just Not in Your
Ears!
Make sure you turn the volume
down (towards MIN) on the unit
before you put on headphones.
Increasethe volume to the
desired level only after headphones are in place.
Music Calendar
You can see at a glance how many tracks there
are on the playing disc. A ">" appears if there
are more than 15 tracks. In play mode, one of
the numbers flashes to indicate the playing
track; the ">" flashes for the track numbers
greater than 15.
÷
.......................................................................
RP8085 IB 6 _ 4/5/00, 9:49 AM