Table of Contents
Advertisement
Important
Safety
Precautions
To secure TV to stand or Waft, use hardware listed below (Not Supplied)
1.
Attach the wall anchor on the stand.
2.
Tie the ropes or chains with TV pedestal screws.
Ropes or chains should be secure tightly.
3.
Fasten the anchor bolts into top wall-mount holes.
4.
Attach the wall anchors on the wall strong enough to support the weight of the TV. (Attach to the
Wall Stud).
5.
Make sure to connect anchor bolts to wall anchors.
•
Anchor bolt - M6 x 10mm (42"and 47") or M6x 16mm(55")
6.
Check that all connections
are properly secured. Periodically
check for any sign of fatigue or
failure. If you have any doubt about the security of your connections,
contact a professional
installer.
5
Hide quick links:
Advertisement
Table of Contents
