Connect To Other Devices - ProScan 42LC55S240V87 User Manual

Setting Up
Warning: Before connecting the TV to any other electronic device, unplug the TV and electronic
device AC cords from the AC input.
Note: Not all following terminals are included on your TV. The actual one refer to "TV Rear".
1. Connect to broadcast antenna or the cable TV
To have an optimal picture quality, it is strongly recommended to have an external antenna or a cable TV.
Note:
- It is recommended that coaxial cable (750) be used to eliminate the interference caused by the
mismatched impedance.
- The antenna cable should not be bound together with the power cord.
- When using the cable TV, please insert the plug of the coaxial cable (75 O) directly into the antenna
A. E..ASOO.E COA.,A OAO .,
ANT
outlet.
Adaptor (not suppl_
the screw
TWIN-LEAD FEEDER
(3000)
The signal comes from:
An outdoor antenna
An indoor antenna
CATV net
2.Insert the feeder in 3.Tighten the screw
2. Connect to AV devices
- Connect a Video RCA cable to an appropriate external A/V device such as a VCR, DVD or Camcorder.
- Connect RCA audio cables to "R -AUDIO - L" on your set and the other ends to corresponding audio
out connectors on the A/V device.
LU
= 1::3
>
Audio R
Audio L
Video
VCD, DVD, set-top boxes, etc.
12