Setup Menu - RCA P42WHD33 User Manual

VGA Picture menu
Tile following Picture menu options are only available for VGA input.
Auto adjustment Adjusts tile position of the picture automatically.
Phase Adjusts tile picture if there is flicker of screen letters, color
misalignment, or blurring.
Clock Adjusts the clock sync of the picture.
Verticalposition Adjusts the picture's position upward or
d own ward.
Horizontalposition Adjusts the picture's position left or right.
Setup Menu
The Setup menu lets you configure the TV to fit its surroun(lings and
your preferences. To access the ,S>tup menu, press MENU on the
remote, and then select &,tz@ from the Main Menu.
Channel setup
Signal source If you connected a signal to the ANTENNA/
CABLE ANALOG INPUT only, select AJlah4_. If you connected
a signal to the ANTENNA/CABLE DIGITAL INPUT only, select
D{_it(d. If vou connected a signal to both inputs, select l_oth.
Analog signal type (available for the analog tuner only) The
analog signal type was set during the initial setup. If you change
how you receive broadcasts through the ANTENNA,CABLE
ANALOG INPUT, you must change the ,Si{_zal O,p(, setting. Choose
C?lbk, if you are using cable or a cable box for TV signals. Choose
Amemza if you are using an oftLair antenna for analog TV signals.
Dig. signal type (available for the digital tuner only) The digital
signal type was set during the initial setup. If you change how you
receive broadcasts through the ANTENNA/CABLE DIGITAL INPITT,
you must change the 5'{_zal 0_pe setting. Choose C?lbk, if you are
using cable or a cable box for T\.' signals. Choose AmeJlJm if you
are using an off-air antenna for digital TV signals.
Auto CB. search Searches for channels the signal is receiving.
Go to page 14 for more infommtion.
Auto CB. update Searches for any new channels that are not in
your channel list and adds them to the list.
List and Labels Edit the channels in the list or choose labels for
each channel.
Channelnumber Use the number buttons on your remote to
enter the channel number.
In channel list If you've entered a channel you want to add to
the channel list, higll]igllt h_ chamwl list and press the rigllt arrow
to place a check in the check box. If you've entered a channel
you want to delete tkom the channel list, press the fight arrow
button to uncheck the box.
List and Labels continued on next page...