Complete The Initial Setup; Set The Menu Language; Complete Channel Setup - RCA P42WHD33 User Manual

Complete the initial Setup
Tile Jnenu system in your TV allows the TV's _batUTcSto wolk plopeT]y. The flTst time you turn
()]] VOUT T\ g, tile
]ang/lag<_ SCTCen appears.
Set the Menu Language
The first part of the setup allows you to select you1 pTefcTrcd language
for Ell{2 ]nel]L1 syste]n.
If English is your pretbTTed language, press OK. To choose another
language, pTess the down aTT()W butt{m until that hmguage is
hig]l]ig]lted, and press OK.
CompJete Channel Setup
Make sure you've connected the T\..'to cable an(I or an of_aiT signal
befoTe you StaTt the next paTt of the setup.
Set the Signal Source
1. A. Did you connect a signal to both ANTENNAiCAI_LE ANALOG
and I)IGITAL INPUTS on the back of your TV? If not, go to step
lB. If so, press tile down arrow button to higillight Aria. s_nal
Oy)eand go to step 2.
B. I)id you connect a signal to only the ANTENNA/CABLE
ANALOG INPUT? If not, go to step 1(2. If so press the Tight arrow
button to select AJlalqg and then press the down arrow button to
highlight AJza. s{gnal l.tp_'. Go to step 2.
C. Did you connect a signal to only the ANTENNA/CABLE
I)IGITAL INPUT? If not, go to step 2. If so, press the rigilt arrow
button to select L){gital and then press the down arrow button to
highlight D{g. s{g_za/Oy)e. Go to step 3.
Set the Analog Signal Type
2. A. Did you connect cabk' to the ANTENNAiCAIBLE ANALOG
INPUT? If not, go to step 2B. If so, leave the option set to C?fb/_'
and then press tile down arrow button to higillight l){_. s_na/
Oy)e. Go to step 3.
B. I)id you connect an antenna to the ANTENNAiCAIBLE
ANALOG INPUT? If not, go to step 3. If so, press the right arrow
button to highlight Antenna and then press the down arrow
button to highlight l){q. s(gna/Ope. Go to step 3.
Set the Digital Signal Type
3. If you connected a signal to tile ANTENNA/CABLE I)IGITAL
INPUT, leave tile option set to Azztod_'t(,(/ion. The signal type is
chosen for you and changes on-scTeen according to that type once
a signal is detected. Press the down anx)w button to iligh]ight Az_to
U?..vg,gltVb. Go to step 4.
<hapter