Table of Contents
Advertisement
Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
ON.OFF
Turns the VCR on and off when the remote
is set to
control the VCR. Turns off other components
if remote is
programmed.
PAUSE Pauses playback or recording.
Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
RECORD Starts VCR recording.
Also used for express recording.
REVERSE Rewinds the tape when the VCR is stopped. Searches
backward through
a tape during playback. Starts slow motion
during play-pause and decreases slow-motion
speed.
SEARCH Displays Index and Go-To Search menus on TV screen
when VCR is stopped.
Advances the tape 30 seconds of recorded
material during playback. Each press advances the tape an
additional
30 seconds up to five minutes.
SPEED Selects a recording
speed (SP or SLP).
STOP Stops the current VCR function
such as record, playback,
rewind,
or fast forward.
TRACKING Up or Down
Lets you manually
reduce the streaks
that may appear on the picture during play, slow motion,
or
pause. Reduces picture '_jitter" during sLop-action playback.
TV.VCR
Switches the picture signal so that it either comes from
the VCR or cable/antenna
system.
TV FUNCTION
BUTTONS
CHAN Up or Down
Selects next higher or lower channel in the
TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK
Switches between
two channels. Select one channel
and then select another
using the number buttons.
Press GO
BACK to switch between
the two channels.
INFO Shows the TV's status displays on the TV screen.
MUTE
Reduces volume to minimum
level.
TV Buttons
The TV buttons may not control all
features
of all models of RCA,
ProScan and GE TVs.
19
Advertisement
Table of Contents
