Table of Contents
Advertisement
References
Trouble Checks-
You may have problems that can be fixed with a few minor adjustments.
Look for the type of problem you are having below and then try the
suggestions
to get your TV going again. For warranty information see page 29.1
Trouble
Checks
and Adjustments
Power
TV will not turn on
Plug TV in.
Plug something
else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press POWER.
Make sure batteries are placed in the remote the right way. See batteries
on page 2.
Unplug TV for h few minutes and then turn it on again.
No picture, no sound but
TV has power
Picture
Blank screen or Unusable
Signal appears on screen
Check antenna
connections.
Check position of Cable/Air
feature. See page 24.
Try another channel.
Inactive channel may be tuned.
Make sure componentconnected
to the VIDEO INPUT jacks is turned on if
you choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR
if watching a VCR.
Make sure TV/VCR button on VCR is in correct position when using VCR.
Try another channel.
Inactive channel may be tuned.
Scan the channels.
Picture poor, sound okay
Sound
Noisystereo
reception
Check antenna
connections.
Adjust TV picture. See pages 16-17.
Turn Stereo off. The stereo broadcast may not be clear. See page 18.
Picture okay, no sound
Picture okay, sound poor
Press VOLUME + or MUTE to restore sound.
Try another channel.
Try adjusting the Stereo or Tone. See page 18.
Change Stereo to off. The stereo broadcast maynot
be clear. See page 18_
No stereo on stereo station
Make sure Stereo is turned on. See page 18.
27
Advertisement
Table of Contents
