With:audioequipment - RCA F19253BCFJ1 User Manual

Using Your TV and Remote
With:AudioEquipment: Programming andBasic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook
up your audio equipment. Your remote controls some audio equipment such
as a radio, CD player, tape player, kLrntable, or amplifier. The remote may
need to be programmed for your equipment, but may not operate all
models of the brands listed below: Use the codes below or on the sheet packed
in wtth your remote.
Program the remote for
audio equipment
Basic Operation
Audio Codes
RCA/Dimensia i
AM/FM ...........................03
CD ................................ ....07
Tape ..........................._.....06
Phono ..............................05
• Aux ......:...........................04
pO_R_-_ VCR1 SATeCABLE T_
O.
REW PLAY FF
REC STOP PAUSE
DISPLAY SKIP
MUTE CHA_ PREVCFI
10
4 0 B 0 6 0
INPUTo 00 ANTENNAo
_MOVE J_
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the
code list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AU DIO and then POWER.
E. Repeat_ A.-D with another code
if the first one does not work.
A. Point the remote at the audio
equipment and press AUDIO.
B. Press POWER to turn it on.
C. Use the buttons on the remote
that relate to audio functions.
Not all buttons highlighted
may work with your
equipment.
D. Turn the audio equipment off
using the audio component's
power off button.
15