RCA F19253BCFJ1 User Manual page 13

Thomson
Table of Contents

Advertisement

Using Your TV and Remote
With a Satellite Receiver: Basic Operation
You may also be able to use the TV's remo_ewith
satellite receivers.
Refer
to your Satellite Receiver owner's manual to hook up your Satellite Receiver.
The remote may need to be programmed
for other brands of satellite
receivers, but may not operate all models of the brands listed below.
Use
the codes below or on the sheet packed in with your remote.
Follow the instructions
below for basic operation of your receiver.
You
may also Want to experiment with other buttons
on the remote to see if
they work _with your receiver.
Program
the remote
foryour
Satellite
Receiver
Turn on the
Satellite Receiver
Turn off the
Satellite Receiver
Satellite
Receiver
Codes
Chaparral ..........................80,81
Cheyenne ...............................81
Drake .................................82,83
DSS..........................................00
GE............................................00
General Instruments ...92,93,94
ProScan....................:..............00
RCA........:..............................,00
Realistic ....................... _ ..........84
.SierraI,II,llI............................81
STS1......................................._85
STS2.......... . ...............................86
STS3.........................................87
STS4
........................................
88
Toshiba ..........................., ......89
Uniden .........L.........................90
Video Cipher II....._................91
10
2.0
3 0
'0
"0
INPUTo
0 0
ANTENNAo
q
MOVE
A. Point the remote at the satellite
receiver and hold SAT-CABLE•
B. Enter the code for your brand
from the code list below.
C. Release SAT-CABLE.
D. Press POWER. If nothing
happens, try preerosing
SAT'CABLE and then POWER.
A. Press SAT-CABLE to set
the remote to control the satel-
litereceiver.
B. Press POWER to turn on the
receiver if it did not turn on
when you pressed SAT,CABLE.
A. Press SAT*CABLE to set
the remote to control the satel-
lite receiver.
B. Press POWER to turn off
the receiver.
11

Advertisement

Table of Contents
loading

Table of Contents